Hammer-on & Pull-off Exercise

Consecutive hammer on and pull off exercises (legato) are excellent practice for strengthening our fingers and improving their coordination. We’ll make use of various finger combinations so we can physically get utilized towards the various note intervals we’ll come across within the scale patterns we learn in later stages.

One of the most typical method to apply both methods together would be to apply the hammer-on and instantly pull-off back towards the starting note. To get the most out of the exercise, try performing them at various speeds.

You will have to get used to consecutive hammer on – pull off combinations especially if you want to learn blues and metal guitar, but they are used generally in all genres to various extent.

Electric Guitar Anatomy

This lesson is the ideal place to begin your guitar career. All guitars share particular characteristics that make them behave like guitars. Understanding the anatomy of an electric guitar is essential for understanding how you can make music with it and how you can take care of it.

Body: The primary component from the guitar, which connects towards the guitar neck. This really is also exactly where the pickups and bridge are situated.

Bridge: This really is an region about the face from the guitar exactly where the strings are connected towards the face.

End pin: A metal post where the rear end of the strap connects.

Frets: Vertical metal wires that sit vertically about the guitar neck.

Headstock: The region from the guitar in the end from the neck exactly where the strings are tuned.

Neck: The long narrow component from the guitar exactly where notes are fretted. Situated between the entire body and headstock from the guitar.

Nut: The point about the guitar neck where the strings touch the neck and join the headstock.

Pickup Selector: A switch situated about the entire body from the guitar utilized to select various pickups for various tones and sounds.

Pickups: A magnet wrapped in wires that sits about the face of an electric guitar, underneath the strings. When the strings move, it interferes with the magnetic field from the pickup, and that impulse is sent towards the amplifier. The impulse is then modified in the amplifier.

Tremolo (Whammy Bar): A bar connected towards the bridge from the guitar. By moving the tremolo bar up or down, you are able to move the bridge, thus changing the pitch.

Tuning Pegs: The pegs situated in the headstock, which are utilized to tune the guitar. The machine heads have gears that may tighten or loosen the string when turned, drawing them to different pitches.

Volume and tone controls: Knobs that vary the loudness of the guitar’s sound and its bass and treble frequencies.

The parts of an electric guitar.